PHP 8.3.4 Released!

Nombres à virgules flottantes

Les nombres à virgule flottante (aussi connus comme "floats", "doubles", ou "nombres réels") peuvent être spécifiés en utilisant les syntaxes suivantes :

<?php
$a
= 1.234;
$b = 1.2e3;
$c = 7E-10;
$d = 1_234.567; // à partir de PHP 7.4.0
?>

Formellement à partir de PHP 7.4.0 (auparavant, les underscores n'étaient pas autorisé) :

LNUM          [0-9]+(_[0-9]+)*
DNUM          ({LNUM}?"."{LNUM}) | ({LNUM}"."{LNUM}?)
EXPONENT_DNUM (({LNUM} | {DNUM}) [eE][+-]? {LNUM})

La taille d'un nombre décimal est dépendante de la plate-forme, cependant, un nombre maximal d'environ 1.8e308 avec une précision sur 14 chiffres est une valeur commune (format 64 bits IEEE).

Avertissement

Précision des nombres flottants

Les nombres flottants ont une précision limitée. Même s'ils dépendent du système, PHP utilise le format de précision des décimaux IEEE 754, qui donnera une erreur maximale relative de l'ordre de 1.11e-16 (dûe aux arrondis). Les opérations arithmétiques non-élémentaires peuvent donner des erreurs plus importantes et bien sûr les erreurs doivent être prises en compte lorsque plusieurs opérations sont liées.

Aussi, les nombres rationnels exactement représentables sous forme de nombre à virgule flottante en base 10, comme 0.1 ou 0.7, n'ont pas de représentation exacte comme nombres à virgule flottante en base 2, utilisée en interne, et ce quelle que soit la taille de la mantisse. De ce fait, ils ne peuvent être convertis sans une petite perte de précision. Ceci peut mener à des résultats confus: par exemple, floor((0.1+0.7)*10) retournera normalement 7 au lieu de 8 attendu, car la représentation interne sera quelque chose comme 7.9999999999999991118....

Ainsi, ne faites jamais confiance aux derniers chiffres d'un nombre flottant, mais aussi, ne comparez pas l'égalité de 2 nombres flottant directement. Si une plus grande précision est nécessaire, les fonctions mathématiques de précision arbitraire et les fonctions gmp sont disponibles.

Pour une explication "simple", voir le » guide relatif aux nombres à virgule flottante.

Convertir en un nombre flottant

Depuis des chaînes de caractères

Si une chaîne est numérique ou numérique de tête alors elle sera transformée en sa valeur flottante correspondante, sinon elle sera convertie à zéro(0).

Depuis d'autres types

Pour les valeurs d'autres types, la conversion est effectuée en convertissant la valeur d'abord en int puis en float. Voir conversion en entier pour plus d'informations.

Note:

Comme certains types ont un comportement indéfinie lors de la conversion en int, ceci est aussi le cas lors de la conversion en float.

Comparaison de nombres flottants

Comme dit dans la note ci-dessus, le test d'égalité des valeurs de nombres flottants est problématique, en raison de la façon dont ils sont représentés en interne. Cependant, il existe des façons de réaliser cette comparaison.

Pour tester l'égalité de valeurs de nombres flottants, une borne supérieure de l'erreur relative à l'arrondi est utilisée. Cette valeur est connue comme étant l'epsilon de la machine, ou le unit roundoff, et est la différence la plus petite acceptable dans les calculs.

$a et $b sont égaux sur 5 nombres après la virgule.

<?php
$a
= 1.23456789;
$b = 1.23456780;
$epsilon = 0.00001;

if(
abs($a-$b) < $epsilon) {
echo
"true";
}
?>

NaN

Quelques opérations numériques peuvent donner comme résultat une valeur représentée par la constante NAN. Ce résultat représente une valeur indéfinie ou non représentable lors de calculs avec des nombres à virgule flottante. Toute comparaison, même stricte de cette valeur avec une autre valeur, y compris cette constante elle-même, sauf si elle est égale à true, donnera une valeur de false.

En raison du fait que NAN représente tout nombre de valeur différente, NAN ne doit pas être comparé à d'autres valeurs, y compris cette constante elle-même, et à la place, elle doit être vérifiée en utilisant la fonction is_nan().

add a note

User Contributed Notes 11 notes

up
251
catalin dot luntraru at gmail dot com
10 years ago
$x = 8 - 6.4; // which is equal to 1.6
$y = 1.6;
var_dump($x == $y); // is not true

PHP thinks that 1.6 (coming from a difference) is not equal to 1.6. To make it work, use round()

var_dump(round($x, 2) == round($y, 2)); // this is true

This happens probably because $x is not really 1.6, but 1.599999.. and var_dump shows it to you as being 1.6.
up
112
feline at NOSPAM dot penguin dot servehttp dot com
19 years ago
General computing hint: If you're keeping track of money, do yourself and your users the favor of handling everything internally in cents and do as much math as you can in integers. Store values in cents if at all possible. Add and subtract in cents. At every operation that wii involve floats, ask yourself "what will happen in the real world if I get a fraction of a cent here" and if the answer is that this operation will generate a transaction in integer cents, do not try to carry fictional fractional accuracy that will only screw things up later.
up
61
www.sarioz.com
21 years ago
just a comment on something the "Floating point precision" inset, which goes: "This is related to .... 0.3333333."

While the author probably knows what they are talking about, this loss of precision has nothing to do with decimal notation, it has to do with representation as a floating-point binary in a finite register, such as while 0.8 terminates in decimal, it is the repeating 0.110011001100... in binary, which is truncated. 0.1 and 0.7 are also non-terminating in binary, so they are also truncated, and the sum of these truncated numbers does not add up to the truncated binary representation of 0.8 (which is why (floor)(0.8*10) yields a different, more intuitive, result). However, since 2 is a factor of 10, any number that terminates in binary also terminates in decimal.
up
1
251701981 at qq dot com
7 months ago
<?php

//Please consider the following code
printf("%.53f\n",0.7+0.1); // 0.79999999999999993338661852249060757458209991455078125

var_dump(0.7+0.1); // float(0.8)

var_dump(0.799999999999999); //float(0.8)

var_dump(0.7999999); // float(0.7999999)

//Conclusion: PHP can support up to 53 decimal places, but in some output functions such as var_ Dump, when outputting decimals exceeding 14 places, will round off the 15th place, which causes significant misleading
//experimental environment:linux x64,php7.2.x
up
19
backov at spotbrokers-nospamplz dot com
21 years ago
I'd like to point out a "feature" of PHP's floating point support that isn't made clear anywhere here, and was driving me insane.

This test (where var_dump says that $a=0.1 and $b=0.1)

if ($a>=$b) echo "blah!";

Will fail in some cases due to hidden precision (standard C problem, that PHP docs make no mention of, so I assumed they had gotten rid of it). I should point out that I originally thought this was an issue with the floats being stored as strings, so I forced them to be floats and they still didn't get evaluated properly (probably 2 different problems there).

To fix, I had to do this horrible kludge (the equivelant of anyway):

if (round($a,3)>=round($b,3)) echo "blah!";

THIS works. Obviously even though var_dump says the variables are identical, and they SHOULD BE identical (started at 0.01 and added 0.001 repeatedly), they're not. There's some hidden precision there that was making me tear my hair out. Perhaps this should be added to the documentation?
up
5
lwiwala at gmail dot com
7 years ago
To compare two numbers use:

$epsilon = 1e-6;

if(abs($firstNumber-$secondNumber) < $epsilon){
// equals
}
up
7
Luzian
18 years ago
Be careful when using float values in strings that are used as code later, for example when generating JavaScript code or SQL statements. The float is actually formatted according to the browser's locale setting, which means that "0.23" will result in "0,23". Imagine something like this:

$x = 0.23;
$js = "var foo = doBar($x);";
print $js;

This would result in a different result for users with some locales. On most systems, this would print:

var foo = doBar(0.23);

but when for example a user from Germany arrives, it would be different:

var foo = doBar(0,23);

which is obviously a different call to the function. JavaScript won't state an error, additional arguments are discarded without notice, but the function doBar(a) would get 0 as parameter. Similar problems could arise anywhere else (SQL, any string used as code somewhere else). The problem persists, if you use the "." operator instead of evaluating the variable in the string.

So if you REALLY need to be sure to have the string correctly formatted, use number_format() to do it!
up
5
james dot cridland at virginradio dot co dot uk
20 years ago
The 'floating point precision' box in practice means:

<? echo (69.1-floor(69.1)); ?>
Think this'll return 0.1?
It doesn't - it returns 0.099999999999994

<? echo round((69.1-floor(69.1))); ?>
This returns 0.1 and is the workaround we use.

Note that
<? echo (4.1-floor(4.1)); ?>
*does* return 0.1 - so if you, like us, test this with low numbers, you won't, like us, understand why all of a sudden your script stops working, until you spend a lot of time, like us, debugging it.

So, that's all lovely then.
up
5
magicaltux at php dot net
13 years ago
In some cases you may want to get the maximum value for a float without getting "INF".

var_dump(1.8e308); will usually show: float(INF)

I wrote a tiny function that will iterate in order to find the biggest non-infinite float value. It comes with a configurable multiplicator and affine values so you can share more CPU to get a more accurate estimate.

I haven't seen better values with more affine, but well, the possibility is here so if you really thing it's worth the cpu time, just try to affine more.

Best results seems to be with mul=2/affine=1. You can play with the values and see what you get. The good thing is this method will work on any system.

<?php
function float_max($mul = 2, $affine = 1) {
$max = 1; $omax = 0;
while((string)
$max != 'INF') { $omax = $max; $max *= $mul; }

for(
$i = 0; $i < $affine; $i++) {
$pmax = 1; $max = $omax;
while((string)
$max != 'INF') {
$omax = $max;
$max += $pmax;
$pmax *= $mul;
}
}
return
$omax;
}
?>
up
4
zelko at mojeime dot com
12 years ago
<?php
$binarydata32
= pack('H*','00000000');
$float32 = unpack("f", $binarydata32); // 0.0

$binarydata64 = pack('H*','0000000000000000');
$float64 = unpack("d", $binarydata64); // 0.0
?>

I get 0 both for 32-bit and 64-bit numbers.

But, please don't use your own "functions" to "convert" from float to binary and vice versa. Looping performance in PHP is horrible. Using pack/unpack you use processor's encoding, which is always correct. In C++ you can access the same 32/64 data as either float/double or 32/64 bit integer. No "conversions".

To get binary encoding:
<?php
$float32
= pack("f", 5300231);
$binarydata32 =unpack('H*',$float32); //"0EC0A14A"

$float64 = pack("d", 5300231);
$binarydata64 =unpack('H*',$float64); //"000000C001385441"
?>

And my example from half a year ago:
<?php
$binarydata32
= pack('H*','0EC0A14A');
$float32 = unpack("f", $binarydata32); // 5300231

$binarydata64 = pack('H*','000000C001385441');
$float64 = unpack("d", $binarydata64); // 5300231
?>

And please mind the Big and Little endian boys...
up
3
rick at ninjafoo dot com
18 years ago
Concider the following:

(19.6*100) != 1960

echo gettype(19.6*100) returns 'double', However even .....

(19.6*100) !== (double)1960

19.6*100 cannot be compaired to anything without manually
casting it as something else first.

(string)(19.6*100) == 1960

Rule of thumb, if it has a decimal point, use the BCMath functions.
To Top